Magnetic Contact poli
poli is a wireless magnetic contact with 2 auxiliary inputs, integral part of the 868 MHz Bi-Directional System of Ksenia.
poli is identified, as all Ksenia Security Products, by an unique and exclusive design which develops itself around the Battery volume as the major constraint. It integrates inside 2 programmable inputs which can be used to connect external wired magnetic contacts rather than wired curtain detectors, glass brake detectors and/or wired roller blind detectors, rendering it, as a matter of fact, as a small wireless expansion module (up to 3 zones).
Thanks to its Bi-Directional Communication, the input configuration (type, number of impulses, balance) are programmable directly from the basis software.
As all the other KSENIA wls devices, the poli magnetic contact implements DPMS (Dynamic Power Management System), the possibility to program the supervision time from minimum of 1 minute to a maximum of 240 minutes (default set-up: 5 minutes), the battery status control (with signal warning transmission when its substitution is recommended), and integrates 2 tampers ( on the opening and on its removal).
As all Ksenia wireless devices, poli has a unique serial number which is being automatically acquired by the system during the installation phase; both the basis programming software and the ergo Keypad indicate in real time the signal level of each device and communication path in the case that more BUS Transceivers or Repeaters are present in the same architecture.
poli is available in 3 colors: White, Brown and Grey to make it suitable to the different installation requirements.
The most advanced Wireless Technology adopted by this device is fully Bi-Directional (each Peripheral works therefore as a Transceiver enabling each transmission to receive an Acknowledgment back, allowing a significant battery saving and assuring a superior reliability versus the classic mono-directional systems) and utilizes the frequency band at 868 MHz (FSK Technology).
A sophisticated control of the Transmission Power (DPMS – Dynamic Power Management System) allows to reduce interferences, maximize the battery duration according to the distance among the different devices and the type of installation. The maximum Protection of the entire system is guaranteed by means of a proprietary encryption of each Communication Packet.
All wireless devices have a unique serial number which is being automatically acquired by the system during the installation phase; both the basis programming software and the ergo Keypad indicate in real time the signal level of each device and communication path in the case that more BUS Transceivers or Repeaters are present in the same architecture.