Menu

.

matrix BUS is a wired expansion board that gives the opportunity to add one zone to the control panel when connected to the Ksenia BUS.
It also allows to connect any type of sensor to our BUS, with the objective of simplifying and optimizing the wiring: in addition to an input, it has a serial interface useful for connecting with OPTEX sensors range.
Once connected to the matrix BUS, it is possible to carry out the configuration remotely through Ksenia SecureWeb, or via Ksenia PRO App.
matrix BUS
does not require any battery because it is powered by the KS-BUS.
The size is ultra-compact and has a small buzzer that can be used by the installer to identify the position of a sensor within a room. It has a small buzzer that the installer can set to sound for identify the position of a sensor within an environment.
It also allows you to turn on and off the power supply + P which it is useful, for example, to reset smoke sensors.

.

.

.

.

why matrix BUS

  • because with a single expansion card we can expand the central zones;
  • because it has a universal entrance that allows the management of the shutters;
  • because it is powered by BUS;
  • because it has ultra-compact dimensions;
  • because it has a small buzzer for the identification of a specific sensor.

TECHNICAL DATA

  • Power supply: 13,8 VDC
  • Absorption: 50 mA max.
  • Inputs: nr.1 type alarm (with programmable EOL)
  • Power terminal: 0,5 A
    (protected by a self-restorable thermal fuse)
  • Dimensions: 14×71,5×8 mm (hxlxp)
  • KS-BUS interface

HOW TO ORDER

  • KSI2300006.300 matrix BUS module

PARTI COMPRESE

  • 1 expansion module matrix BUS (PCBA) double-sided tape for installation
  • 1 cable for connecting to the control panel
  • 1 cable for connecting OPTEX motion detectors (BXS, VXS, WXI, WXS e QXI)
  • 1 Installation Manual IT / EN / FR

COMPLIANCE

  • Europe - CE

.

LoginAccount
Go to TOP
Cookie Image