matrix module is a bi-directional universal radio interface for connecting
third-party motion detectors to the lares 4.0 platform, at 868 MHz frequency band.
It is power supplied by 1 or 2 or 3 standard CR-123A lithium batteries, it depends on the power consumption of the connected motion detector
The technology implemented makes possible to transform any type of wired detector at low current consumption, in a wireless detector, especially the OPTEX detectors:
◦ BXS-RAM (detection area: right side and left side)
◦ VXS-RAM / VXS-RDAM (detection area: multidirectional)
Specifically speaking about the OPTEX detectors, the transfer of data between matrix interface and OPTEX detector takes place via the serial link, by connecting the matrix serial port with the OPTEX serial port through the cable supplied.
Thanks to this serial link connection, installers avoid the wiring on the terminal board and, moreover, the whole OPTEX detector configuration can also be performed via any mobile device through APP Ksenia PRO or Ksenia SecureWeb. So that, the switch manual settings of OPTEX are totally forgotten.
For connecting to matrix, all the other third-party motion detectors require electrical wiring of the PCBA terminal board.