gemino IoT 4G-LTE/IP Communicator is an additional device that increases the communication capabilities of the lares 4.0 Platform thanks to the M2M ‘ublox’ Cat.1 professional module. It works on two transmission channels: crypted Ethernet/IP (with proprietary protocol) and 4G-LTE (Long Term Evolution) data network, with band 3, band 7 and band 20 (800, 1800 and 2600 MHz respectively).
gemino IoT is equipped with an Ethernet port and a micro-SIM card slot on board and it is designed to remotely control Dual-Path communication on lares 4.0 Control Panels.
gemino IoT allows lares 4.0 IoT Platforms, installed on sites that do not have sufficient GSM coverage, to be reachable from 4G data network (with reception also on 2G and GPRS bands) or via Internet,
in a completely transparent way for the installer and end-user as well.
All of the above is related to specific features, such as: programming and management of the control panel, push notifications when events occur, sending reports with SIA DC09 digital protocol with supervision of channel and receiver (dual-path), video-verification of IP cameras connected to the local network, It is possible to use gemino IoT as a ROUTER in the absence of wired internet connection.
Finally, it includes easy management and fast synchronization of voice messaging, thanks to the now consolidated partnership with TTS Loquendo® of Nuance Communication.In addition, gemino IoT allows the supervision and therefore the sending of voice, SMS and Contact ID reports when any of the events programmed occur.
Also it provides a high-speed data channel (up to 10Mbit/s in download) able to offer a complete back-up of communication network in the event of failure or temporary lack of coverage, from the 4G network to the IP-LAN network and vice versa, ensuring a total communications and data security.
gemino IoT has to be installed where the lares 4.0 IoT Platform resides, in the same LAN infrastructure through the Ethernet port. The device is supplied with a plastic case for wall mounting, with special openings for connecting the Ethernet network cable and an external antenna if necessary (as an alternative to the internal one).
It is powered by PoE or, alternatively, by 12V external power supply.