Menu

 

Control4 is one of the main leading providers of personalized automation and control solutions that allow the user to virtually control any device installed at home or in the office. Control4 was founded in 2003, the company’s mission is to offer a smart and more convenient way to control and automate lighting, music, video, energy, of a single room or the entire house. Thanks to the collaboration with the most important consumer electronics, household appliances, energy and lighting brands, Control4 is a leader in the sector of interoperability, ensuring a continuous expansion of the ecosystem of connected devices that will work together at home or in the company.

 

 

Driver for lares 4.0 Control panel

 

 

With the new Control4 drivers for lares 4.0 it is possible to manage Ksenia Security Systems from the Control4 interface having all the features and complete programming available.

Thanks to the incredible number of possibilities, you have the chance to get the total control of the lares 4.0 System from the Control4 interface, using Ksenia Security sensors to activate Control4 events.
Enhance your security system with Control4 Audio/Video features.

  • up to 20 partitions;
  • up to 644 zones, according to your lares system;
  • IP Connection;
  • new interface;
  • total control of your lares 4.0 system.

 

 

Driver for domus multifunction sensor

 

 

domus is a built-in module that allows, in one single device, to have a motion detector able to turn the lights on and off according to the internal brightness, every time someone is in the room; a temperature sensor that provides the temperature in order to adapt the level of comfort and a humidity sensor to better control the air conditioning and dehumidification system.

  • make available the temperature and the temperature scale by variables;
  • make available humidity value and if it is over the threshold by variables;
  • make available brightness value and if it is over the threshold by variables;
  • connect it to Yatun Software Thermostat and Temperature Display driver or the default Temperature Display driver by Control4;
  • use multiple instances of the driver in a single project.

Note: This driver is not intended for stand-alone setup: it works only in conjunction with our lares 4 Control4 driver.
Please buy and install the lares 4 driver before setting it up.

 

 

Download the drivers for auxi-H module

 

 

auxi HT is an expansion module for Ksenia lares 4.0 security systems that provides a simple solution for manage roller shutters sistems.

Allows control of the awning / rolling shutter in Open / Close / Stop mode provides fully open, fully closed, partially open and stopped by user states

  • make the roller shutter state available from variables;
  • make the roller shutter position available from variables;
  • make a variable available to indicate whether the awning is moving or not;
  • use multiple instances of the driver in one project.

Note: This driver is not intended for stand-alone setup: it works only in conjunction with our lares 4 Control4 driver.
Please buy and install the lares 4 driver before setting it up.

LoginAccount
Go to TOP
Cookie Image